Sandy Creates Cards & More
 
HOME Sandy's
Stampin' Up

Store
Sandy's
Paper Pumpkin
Page
Sandy's
Pinterest
Page
Sandy's
Blog
Sandy's
Cards
 Contact
Me 
 
Click on the Card Picture Below for Measurements & Materials for each Specific Card
Click Here For Page 1
of Card Pictures & Directions
Click Here For Page 2
of Card Pictures & Directions
Click Here For Page 3
of Card Pictures & Directions
Click Here For Page 4
of Card Pictures & Directions
Click Here For Page 5
of Card Pictures & Directions
Click Here For Page 6
of Card Pictures & Directions
Click Here For Page 8
of Card Pictures & Directions
 
 
Christmas Card featuring Signs of Santa
This is an A2 Size card!
You can substitute colors and sentiments of your choice!

Stamp Set: Signs of Santa  
Sentiment Stamp Set:  Timeless Tidings 
Dies:   Santa's Signpost Framelits
Inks:  Real Red, Memento Tuxedo Black 
Cardstock:   
--Card Base:  Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Real Red Bottom Base Mat:  5-1/4" x 4")
--Whisper White Top Mat:  (5" x 3-3/4")
--Scraps of Whisper White to stamp Mr. & Mrs. Santa & Pole
--Scraps of Whisper White & Real Red for Sentiment
Stampin' Blends:  Real Red, Call Me Clover, Daffodil Delight, Smoky Slate, Cherry Cobbler, Flirty Flamingo  
Embellishments:  Wink of Stella for snow & hat & beard 
Other:  Softly Falling Embossing Folder

Basics:  Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors, Big Shot, Stamparatus
--Cut all Cardstock Mats & Pieces per list.
--Stamp the Santas and Pole on Whisper White scraps with Memento ink.
--Color the 3 pieces as shown using Stampin' Blends.
--Optional - apply Wink of Stella to beard, hat & snow on Santa and Pole.
--Die Cut the 3 pieces using Santa's Signpost Framelits.
--Stamp the sentiment onto a scrap piece of WW CS and cut to size as desired.
--Cut a piece of Real Red to mat the sentiment.

--Run the Top WW Mat thru the Big Shot using the Softly Falling Embossing Folder.

--Pop-up the 3 pieces & sentiment as shown using dimensionals.

--Attach White Mat to Real Red Bottom Mat & then both to the Card Base using tape runner.
 
Spirited Snowmen Scene Card with Video
This is an A7 Size card!   You can substitute colors and sentiments of your choice!  
Stamp Sets:  Spirited Snowmen, Lovely As A Tree
Sentiment Stamp Set:  Peaceful Noel       
Inks: Balmy Blue, Pool Party, Shaded Spruce, Basic Black    
Stampin' Write Markers:   Cherry Cobbler, Garden Green, Pumpkin Pie, Basic Black, Smoky Slate, Pool Party  
Cardstock:     
--Whisper White Card Base:  A7 Card (Folded size 5" X 7")
--Shaded Spruce Bottom Base Mat:  (4-3/4" x 6-3/4")
--Whisper White Top Mat:  (4-1/2" x 6-1/2")
--Scrap piece of cardstock & Post-It Tape to create masks (See Video)
Embellishments:  Dazzling Diamonds  
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot, Stamparatus
--Cut all Cardstock Mats & Pieces per list.
--Stamp the Whisper White mat with the Snowman in Basic Black Archival Ink (as shown).
--Create Mask for sponging background (see video).
--Create mask from Post-It tape to cover snowman when sponging (see video).
--Cover Snowman and sponge bottom of card with Pool Party ink (see video).
--Adjust mask to sponge top of card with Balmy Blue ink - leaving white space in between (see video).
--Stamps trees as shown using Shaded Spruce ink (1st & 2nd generation stamping).
--Color snowman.
--Color spirals on ice (as shown).
-- Apply Tombow glue to the white section and sprinkle Dazzling Diamonds (as shown).
--Stamp the sentiment as shown with Shaded Spruce ink.
--Attach WW Mat to Shaded Spruce Bottom Mat & then both to the Card Base using tape runner.
 
Holiday Card featuring Spirited Snowmen
This is an A2 Size card!
You can substitute colors and sentiments of your choice!

Stamp Set: Spirited Snowmen  
Dies: Colorful Seasons (snowflakes), Bunch of Banners Framelits   
Inks:  Tranquil Tide, Memento Black 
Cardstock:   
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Joyous Noel DSP (dotted pattern)  Bottom Base Mat:  (5-1/4" x 4")
--Strip of Joyous Noel DSP (snowflake pattern)-center piece: (2" x 5-1/2")
--Strip of Crumb Cake - left piece:  (1-1/4" x 5-1/2")
--Whisper White for stamping Snowmen: 2-7/8" square
--Pool Party Mat : 3" Square
--scraps of Tranquil Tide and Whisper White for sentiment * snowflakes
Stampin' Blends:  Smoky Slate, Crumb Cake, Pool Party, Cherry Cobbler, Shaded Spruce, Bermuda Bay 
Optional:  Wink of Stella

Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
--Cut all Cardstock Mats & Pieces per list.
--Die Cut 3 snowflakes from scraps of Tranquil Tide.
--Apply the DSP Bottom Base Mat (dotted pattern) to the card base.
--Apply the strip of Crumb Cake to the left side of the Bottom Base Mat DSP as shown.
--Apply the DSP (snowflake pattern) toward the center of the Bottom Base Mat DSP as shown.
--Glue the 3 snowflake die cuts as shown.

--Stamp the Whisper White square with the Snowmen stamp in Memento ink.
--Color the Snowmen with Stampin' Blends. (I applied Wink of  Stella to the white parts of the snowmen and to the lower snow pile).
--Stamp the sentiment using Tranquil Tide ink on a scrap piece of Whisper White CS.
--Die cut your sentiment using the banner die from Bunch of Banners Framelits.  
--Die cut the framelit a 2nd time from a scrap of Tranquil Tide CS and use the outside frame piece to surround the stamped sentiment piece.
--Glue the snowmen square to the Pool Party square.
--Pop-Up the matted Snowmen square to the center of the card as shown.
--Pop-up the sentiment using dimensionals - place as shown.
 
Celebrate You Card featuring Bella & Friends
This is an A2 Size card!
You can substitute colors and sentiments of your choice!

Stamp Set:  Bella & Friends 
Sentiment Stamp Set:   Birthday Blossoms
Punch:   Balloon Bouquet Punch
Inks:  Memento Tuxedo Black
Cardstock:   
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Highland Heather Bottom Base Mat:  (5-1/4" x 4")
--Whisper White Top Mat:  (2-3/4" x 3-3/4")
--Highland Heathers DSP from Subtles DSP set:  (1-1-2" x 5-1/4")
--Scraps of Elegant Eggplant, Granny Apple Green & Marina Mist for balloons
Stampin' Write Markers:   Perfect Plum, Daffodil Delight
Embellishments:   Twine

Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
--Cut all Cardstock Mats & Pieces per list.
--Stamp the Whisper White mat with the stamp from Bella & Friends and the sentiment from Birthday Blossom in Memento ink.
--Color the candle, cupcake and collar with markers.
--Attach the strip of Highland Heather DSP to the bottom base mat.
--Attach the stamped white mat to the bottom base mat.
--Punch the balloons in assorted colors using the Balloon Punch.
--Tie Twine to each of the balloons.
--Pop-up the balloons using dimensionals.
--Tie a bow to gather the twine on the balloons.
--Attach Bottom Mat to the Card Base using tape runner.
 
Layered Cards Featuring Dashing Deer, Seasonal Chums & Peaceful Poinsettia
These are all A2 Size cards !   
You can substitute colors and sentiments of your choice!
  

-
Cut all Cardstock Mats & Pieces per list.
--Stamp Sentiment & Punch with Everyday Label Punch.
--Attach DSP strips to outside edges of  Base Mat as shown with tape runner.
--Attach DSP piece to center of Base Mat.
--Attach Die Cut piece as shown. (Pop-up with Dimensionals Optional).
-- Pop-up sentiment and position as shown.
--Attach Base Mat to A2 card base.
Dashing Deer Card
Stamp Set:  Labels to Love (sentiment)
Dies:  Dashing Deer
Punch:  Everyday Label Punch
Ink: Merry Merlot
Cardstock:  Gray Granite, Whisper White, Joyous Noel DSP, Glitter Paper
-Whisper White A2 Size Card Base
-Gray Granite Base Mat:  (5-1/4" x 4")
-DSP1:  2 strips: (3/4" x 2-7/8", 2 strips: (3/4" x 4-1/8")
-DSP2:  1 piece: (2"x 3-1/4")
-Scrap of Glitter Paper for Deer Die Cut & Whisper White for sentiment
Poinsettia Card
Stamp Set:  Labels to Love (sentiment)
Dies:  Detailed Poinsettia Thinlits
Punch:  Everyday Label Punch
Ink:  Real Red
Cardstock:  Garden Green, Whisper White, Under the Mistletoe DSP, Red Foil Paper
-Whisper White A2 Size Card Base
-Garden Green Base Mat:  (5-1/4" x 4")
-DSP1:  2 strips: (3/4" x 2-7/8", 2 strips: (3/4" x 4-1/8")
-DSP2:  1 piece: (2"x 3-1/4")
-Scrap of Red Foil paper for Poinsettia & Whisper White for sentiment & Poinsettia
Snowman Card
Stamp Set:  Seasonal Chums, Labels to Love (sentiment)
Dies:  Seasonal Tags Framelits
Punch:  Everyday Label Punch
Ink: Garden Green
Cardstock:  Garden Green, , Whisper White, Be Merry DSP
-Whisper White A2 Size Card Base
-Garden Green Base Mat:  (5-1/4" x 4")
-DSP1:  2 strips: (3/4" x 2-7/8", 2 strips: (3/4" x 4-1/8")
-DSP2:  1 piece: (2"x 3-1/4")
-Scraps of Whisper White for sentiment & Snowman
Stampin' Blends or Stampin' Write Markers to color the Snowman
 
Merry Christmas Card featuring Winter Woods Stamp Set with Video
This is an A2 Size card!   
You can substitute colors and sentiments of your choice!
  

Stamp Set:   Winter Woods
Sentiment Stamp Set: Merry Christmas to All    
Dies: In the Woods Framelits    
Inks:  Tranquil Tide, Balmy Blue, Smoky Slate   
Cardstock:     
--Whisper White Card Base:  A2 Card
--Tranquil Tide Bottom Base Mat:  (5-1/4"H x 4"W)
--Shimmery White Top Mat:  (5" x 3-3/4")
--Whisper White Scrap for Tree Stamp
Embellishments: (optional) Apply Wink of Stella to the Die Cut Tree    
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot 
--Cut all Cardstock Mats & Pieces per list.
--Use a sponge dauber and Balmy Blue Ink to put a light layer of ink on the Shimmery White CS top mat.
--Stamp the Tree Cluster onto the top mat using Smoky Slate ink as shown.
--Stamp the Merry Christmas sentiment onto the top mat using Tranquil Tide Ink as shown.
--Stamp the Pine Tree onto a scrap of WW using Tranquil Tide Ink.
--Die cut the stamped image using the tree shape with partial cutouts.  Lift the flaps for added dimension.
--Glue the stamped tree onto the white mat as indicated.
--Attach White Mat to Tranquil Tide Bottom Mat & then both to the Card Base using tape runner.
   
-
 
Holiday Card featuring In the Woods Framelits Dies
This is an A2 Size card!  You can substitute colors and sentiments of your choice!
Video shows alternate sentiments and background pieces, and alternative materials are listed in video description.

Sentiment Stamp Set:  
Merry Christmas to All
Dies:  
In the Woods Framelits, Bunch of Banners Framelits
Inks: 
Night of Navy
Cardstock:  
--
Whisper White Card Base:  A2 Card
--Bottom Base Mat:  DSP from Twinkle Twinkle(5-1/4"H x 4"W)
--Whisper White Scraps for Sentiment & Die Cuts
Embellishments:  
Wink of Stella or Shimmer Spray on font of card
Other Tools:   
Sponge Dauber
Basics: 
Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
--Cut all Cardstock Mat per list.
--Stamp the scrap of Whisper White with sentiment using Night of Navy Ink.
--Die Cut the Sentiment using Bunch of Banners Framelit as shown - trim the edge.
--Die Cut the trees and bottom border piece using In the Woods Framelits as shown.
--Glue the trees, bottom border & sentiment onto DSP as shown.
--Trim border piece if needed.
--Use sponge dauber with Night of Navy ink on the bottom and two side edges of the border piece.
--Optional:  Spray finished mat with Shimmer Spray or apply Wink of Stella to the trees and bottom border piece.
--Attach Mat to the Card Base using tape runner.
 
Birthday Card featuring Rooted in Nature
This is an A2 Size card!
Stamp Set:  Rooted in Nature
Sentiment Stamp Set:  Birthday Banners
Dies: Petals & More Thinlits
Inks: Rich Razzleberry, Versamark
Cardstock:  Rich Razzleberry, Whisper White, Natures Poem DSP ( Cut pieces per  measurements below)
--Whisper White Card Base:  A2 Card (Folded Size 5-1/2" x 4-1/4")
--Rich Razzleberry Bottom Base Mat:  (5-1/4" x 4")
--2 Whisper White Bottom Mats:  (2-1/2" square)
--2 Nature's Poem DSP Top Mats:  (2-1/4" square)
--1 Whisper White Bottom Mat: (2-1/2" x 4")
--1 Rich Razzleberry Top Mat:  (2-1/4" x 3-3/4")
--Scrap of Whisper White to Stamp Sentiment
Other: White Embossing Powder, Embossing Buddy, Heat Tool

Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot

You can choose alternate colors, papers * sentiment of your choice.
--Cut all pieces per list.
--Use Embossing Buddy to apply powder to the Rich Razzleberry Tree Mat, stamp tree from Rooted in Nature in Versamark Ink.
--Sprinkle White Embossing Powder onto stamped image.  Heat with Heat Tool to melt embossing powder.
--Stamp the sentiment onto scrap piece of Whisper White with Rich Razzleberry ink, die cut with die from Petals & More Thinlits.
--Apply DSP square mats to Whisper White square mats with tape runner.
--Attach Tree mat to Whisper White Mat using tape runner.
--Attach all 3 mats above to Rich Razzleberry Bottom Mat as shown using tape runner. 
--Attach Rich Razzleberry Bottom Mat to the Card Base using tape runner.
--Pop-up the sentiment using dimensionals as shown.

 
Christmas Wishes Card featuring Peaceful Poinsettia
This is an A2 Size card!
You can substitute colors and sentiments of your choice!

Stamp Set:   Peaceful Poinsettia
Sentiment Stamp Set:   Peaceful Poinsettia
Dies:   Detailed Poinsettia Thinlits
Inks:  Real Red 
Cardstock:  Garden Green,  Cherry Cobbler, Whisper White, Sparkle Glimmer Paper, This Christmas DSP (retired), Green & Red Foil Paper (stock)
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Garden Green Bottom Base Mat:  (5-3/8" x 4-1/8")
--Cherry Cobbler Mat:  ( 3-3/4" square)
--Glimmer Paper:  (3-1/2" square)
--DSP Strips:  (5-3/8" x 1")  (4-1/8" x 1")
Embellishments:   Clear Faceted Gems
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue, Mini Glue Dots, Scissors,  Big Shot

--Cut all Cardstock Mats & Pieces per list.
--Die cut the Poinsettia, Leaves, and Red Berries in Red & Green foil paper using Detailed Poinsettia Thinlits as shown.
--Attach Glimmer Paper to Cherry Cobbler Mat.
--Attach flower pieces to Glimmer Paper using tape runner or glue, as shown. Use glue dots for red berries.
--Attach 2 DSP strips to Garden Green base mat as shown.
--Stamp Christmas Wishes sentiment from Peaceful Poinsettia in Real Red ink as shown.

--Attach the completed Cherry Cobbler Mat as shown.
--Attach Garden Green Mat to the Card Base using tape runner.
--Add Faceted Gems as shown.
 
Wishing You All the Best Card 2 featuring Blended Seasons
This is an A2 Size card!  Feel free to substitute colors and sentiments of your choice!
Stamp Set:  Blended Seasons
Sentiment Stamp Set:  Blended Seasons
Dies: Stitched Seasons Framelits
Inks:  Coastal Cabana Ink, Versamark Ink, Coastal Cabana Ink Refill
Stampin' Blends Sets:  Pool Party, Old Olive, Daffodil Delight
Stampin' Write Marker: Pool Party
Cardstock:  
--Whisper White Card Base:  A2 Card
--Pear Pizzazz Bottom Base Mat:  (5-1/4"H x 4"W)
--Watercolor Paper Top Mat for Framelit - spritzed with color:  (6-1/2" x 4-1/2")
--Whisper White to stamp flower on: (5" x 3-3/4")
Other Tools:  Stampin' Spritzer, Detailed Trio Punch, Embossing Buddy, Embossing Powder, Heat Tool, Misti Stamp Positioning Tool
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Glass Blocks, Big Shot Die Cutting Machine
--Cut all Cardstock Mats & Pieces per list.
--Use Detailed Trio Punch to cut design in corners of Pear Pizzazz mat.
--Add Water & 5 drops Coastal Cabana ink refill to Stampin' Spritzer & spray on Watercolor Paper (see video for another alternative method).  Let paper completely Dry.
--When watercolor paper is dry, die cut with largest framelit from Stitched Seasons Framelits.
--Dust powder from Embossing Buddy across WW CS.
--Stamp WW CS using Versamark ink with flower from Blended Seasons.
--Sprinkle Embossing Powder (I used a light Teal powder by Recollections), tape off excess, then use Heat Tool to melt the embossing powder.  Let cool.
--Fussy cut the flower.
--Use Pool Party Stampin Write marker to color the white edges of the paper (see video).
--Use Misti Stamp Positioning Tool to stamp sentiment using Coastal Cabana ink (see video).
--Glue Flower to the Framelit die cut as shown.
--Glue Framelit onto the PP Bottom Mat & then both to the Card Base using tape runner.

 
Thank You Card using Daisy Delight Flower
This is an A2 Size card!
Stamp Set: Daisy Delight, Papillon Potpourri  
Sentiment Stamp Set: Daisy Delight
Dies:  Lots of Labels Framelits 
Inks: Tranquil Tide  
Cardstock:  Whisper White, Tranquil Tide, Mint Macaron, Tranquil Textures DSP
--Whisper White Card Base:  A2 Card
--Tranquil Tide Bottom Base Mat:  (5-1/4"H x 4"W)
--Tranquil Textures DSP Strips: 5 pcs. (3-3/4" x 3/4”)
--Mint Macaron Banner: (2" x 5” trimmed to 2”x 4-1/2" after banner flag cut)
--Mint Macaron Scraps for Circle (2nd smallest circle die) & Butterfly
--Whisper White Scraps for Sentiment Circle (2nd smallest circle die) & 2  Daisies
--Tranquil Tide: Largest Circle Die 
Embellishments: Clear Faceted Gem
Other Tools: Daisy Punch, Triple Banner Punch, Bitty Butterfly Punch  
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
 
Feel free to substitute colors and sentiments of your choice!
--Cut Tranquil Tide Mat, DSP Strips per list.
--Die cut the Mint Macaron & DSP with Framelits per list and glue together  as shown.
--Cut the piece of Whisper White per list and Stamp the Sentiment with Tranquil Tide ink.
--Stamp 2 butterflies from Papillon Potpourri onto a scrap of Mint Macaron & punch out with Bitty Butterfly punch.
--Stamp 2 Daisies on Mint Macaron CS scraps with Tranquil Tide ink & Punch out with Daisy Punch.
--Align 2 daisies as shown and glue together only in center.  Curl the petals upward.
--Adhere two DSP strips to top and bottom of Tranquil Tide mat as shown.
--Glue the two attached Framelits as shown to the center of the Tranquil Tide mat.
--Pop-up Daisy onto Framelits using a dimensional as shown.
--Attach Sentiment as shown with tape runner.
--Glue the two butterflies as indicated.
--Adhere Tranquil Tide mat to Card Base.
--Attach Faceted Gem in center of Daisy.
 
It's A Good Day Card featuring Daisy Delight
This is an A2 Size card!
Stamp Set: Daisy Delight, Papillon Potpourri  
Sentiment Stamp Set: Best Birds
Dies:  Stitched Shapes Framelits 
Inks: Tranquil Tide  
Cardstock:  
--Whisper White Card Base:  A2 Card
--Tranquil Tide Bottom Base Mat:  (5-1/4"H x 4"W)
--Tranquil Textures DSP Strips: 5 pcs. (3-3/4" x 3/4”)
--Mint Macaron Banner: (2" x 5” trimmed to 2”x 4-1/2" after banner flag cut)
--Mint Macaron Scraps for Circle (2nd smallest circle die) & Butterfly
--Whisper White Scraps for Sentiment Circle (2nd smallest circle die) & 2  Daisies
--Tranquil Tide: Largest Circle Die 
Embellishments: Clear Faceted Gem
Other Tools: Daisy Punch, Triple Banner Punch, Bitty Butterfly Punch  
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
 
Feel free to substitute colors and sentiments of your choice!
--Cut Tranquil Tide Mat, DSP Strips & Mint Macaron Piece for Banner
--Cut the notch in the Banner using Triple Banner Punch and trim to finished length.

--Die cut the Tranquil Tide & Mint Macaron circles - see sizes per list.
--Stamp the Sentiment from Best Birds onto a scrap of WW with Tranquil Tide ink & then die cut (see size per list).
--Stamp the butterfly from Papillon Potpourri onto a scrap of Mint Macaron & punch out with Bitty Butterfly punch.
--Stamp 2 Daisies on Whisper White Scraps with Tranquil Tide ink & Punch out with Daisy Punch.
--Align 2 daisies as shown and glue together only in center.
--Pop-up Daisy onto TT circle using dimensionals.
--Glue Strips of DSP onto TT mat or adhere with tape runner.
--Adhere Banner as shown with tape runner.
--Glue all 3 circles and the butterfly, positioning as shown.
--Adhere Tranquil Tide mat to Card Base.
--Attach Faceted Gem in center of Daisy.
 
Wishing You All the Best Card featuring Blended Seasons
This is an A2 Size card!
Stamp Set:  Blended Seasons  
Sentiment Stamp Set:   Blended Seasons
Dies:   Stitched Seasons Framelits
Inks: Memento Tuxedo Black, Flirty Flamingo Refill, Calypso Coral  
Cardstock:   
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Calypso Coral Bottom Base Mat:  (5-1/4" x 4")
--Scrap of Whisper White to stamp the flower
--Piece of Whisper White (5-1/4 x 4) for Stitched Season Framelit Die Cut
Stampin' Blends Sets:  Calypso Coral, Old Olive, Daffodil Delight    
Other:  Detailed Trio Punch, Spritzer 

Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
 
Feel free to substitute colors and sentiments of your choice!
--Cut the Calypso Coral bottom mat to size per list.
--Punch the 4 corners of the CC mat with Detailed Trio Punch.
--Take the piece of Whisper White for the framelit die & a Spritzer to which you add a drop or two of Flirty Flamingo ink and spray the WW CS until you get a background textured look that you are happy with.  Let it dry.
--When it's dry, die cut it with the largest frame from the Stitched Seasons Framelits dies.
--Stamp the flower on a scrap piece of WW using Memento ink.
--Color the flower with Stampin' Blends as shown.
--Fussy cut the flower and attach to the framelit die as shown with tape runner or glue.
--Stamp the sentiment with Calypso Coral ink.
--Attach Framelit to the CC Bottom Mat and then both to the Card Base using tape runner.
 
Friendship Card featuring Love What You Do

This is an A2 Size card!
Stamp Set:  Love What You Do 
Sentiment Stamp Set:  Love What You Do
Dies:  none 
Inks:  Old Olive, Real Red 
Cardstock: Real Red, Old Olive, Whisper White & Watercolor  
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Real Red Bottom Base Mat:  (5-1/4" x 4")
--Watercolor Top Mat for Embossing:  Start with piece 4" x 5"
   Then trim to (3" x 3-3/4") when dry
--2nd Whisper White Top Mat : (1-1/2" x 3-3/4")
--Scrap of Old Olive (1/2' x 3-3/4")
Stampin' Write Marker: Powder Pink
Brusho Crystals:  Brilliant Red, Moss Green
Embellishments: Organza Ribbon, Enamel Shape  
Other: Floral Embossing Folder, Spritzer  

Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
 
Feel free to substitute colors and sentiments of your choice!
--Cut all Mats & Pieces per list.
--Spritz the Watercolor Paper with water.
--Open up the Floral Embossing Folder and sprinkle the Brusho Crystal into the top section  - use the Brilliant Red in the flower areas and the Moss Green in the leaf areas - Spritz with some water.
--Set the piece of Watercolor paper onto the top section of the embossing folder, close the bottom section onto it & Emboss.  Let Dry.
--Stamp the whisper white piece with the flowers and sentiment from Love What You Do stamp set as shown.  Color the flowers with the Powder Pink marker.
--When the top watercolor piece is dry attach to the top of Real Red Bottom mat with tape runner as shown.
--Butt the WW CS piece to the bottom - butting up against the water color piece - attach with tape runner..
--Attach the strip of Old Olive with tape runner to cover the seam.
--Attach a piece of ribbon to the center of the Old Olive strip by taping to the back side of the Real Red mat.
--Attach an enamel shape to the center of the flower.
--Attach Real Red Mat to the Card Base using tape runner.
 
Friendship Card Featuring Floral Phrases
This is an A2 Size card!
Stamp Set: 
Floral Phrases
Sentiment Stamp Set: Paper Pumpkin March 2018*
Dies: Detailed Floral Thinlits
Inks: Real Red, Versamark
 
Cardstock:  Real Red, Whisper White, Sparkle Glimmer Paper 
--Card Base: Whisper White A2 Card (Folded Size 5-1/2" x 4-1/4")
--Sparkle Glimmer Paper Bottom Base Mat:  (5-1/4" x 4")
--Real Red Top Mat:  (5-1/4" x  4")
--Scrap of Whisper White for sentiment
Other:  Everyday Label Punch, White Embossing Powder, Embossing Buddy, Heat Tool
Basics: Paper Trimmer, Adhesive Tape Runner, Tombow Glue,   Dimensionals, Mini Glue Dots, Scissors,  Big Shot
 
*Feel free to substitute colors and sentiments of your choice!
--Cut all Cardstock Mats per list.
--Stamp a scrap of Whisper White with Stamp from Paper Pumpkin March 2018.
--Punch the sentiment using the Everyday Label Punch - for this sentiment I trimmed both the top and bottom edges to better fit the size of the sentiment.
--Die Cut the Real Red mat with the smaller floral die from Detailed Floral Thinlits twice as shown.
--Dust the Real Red Mat with powder from the Embossing Buddy, then stamp the flower from Floral Phrases in Versamark ink.
--Sprinkle on the White embossing powder. Then use the Heat Tool to melt the embossing powder.  Let it cool.
--Glue the Real Red mat onto the Glimmer Paper mat.
--Attach Mats to the WW Card Base using tape runner.
--Pop-up the sentiment using dimensionals.